SONY PCM-E7700 DAT Dual Deck Editor
Model Details :
The unique PCM-E7700 "DATStation" is a dual deck DAT editor that provides 1 ms accurate edits with adjustable crossfade, level and balance control functions.This compact editing system offers two transports in a single transportable unit with real time jog, 2 times speed editing and copying, EDL composition and a highy featured graphical display which provides simple and fast operation.
Features:
• Compact innovative design
• Excellent portability and simple operation. The design of the PCM-E7700 is like that of a laptop computer with an EL display
• Both a player and a recorder, the compact, handy unit weights approximately 8kg (17lb. 10oz.)
• The PCM-E7700 employs EDL based auto-assembly editing, which significantly reduces editing time.
• Edit-in and -out pints are displayed on the EL (Electro-Luminescent) screen. Up to 100 bars can be displayed on the screen as the EDL
• Auto Edit key initiates the complete editing sequence
• EDL and set-up data can be memorized in a back-up memory. Real time monitoring during auto editing and dubbing is provided, and detected errors can be automatically listed and reviewed in the ERROR REVIEW mode function
• Level and balance are adjustable, level and balance settings are also stored along with the EDL and can be recalled during auto editing
• All processing is digital and editing is non-destructive
• Source tapes can be saved and archives unaffected
• High -speed editing and dubbing is achieved by a newly developed servo IC and an advanced DAT signal processing IC, at both normal and twice normal speeds
• Real-time jog capability with high sound quality
• RAW (Read-After-Write) function for real time monitoring
• Internal SMPTE/EBU/Film timecode formats and absolute timecode (A-Time) can be used during recording and dubbing by the PCM-E7700 for editing
• Timecode, ID and program number recording and locating capability
• Headphone jack and unbalanced analog monitor outputs are provided
• Equipped with both AES/EBU digital and balanced analog inputs.
• PCM-E7700 Version 2.0 Software Features
• 3 Modes of Preview:
• Single Cut Preview
• Lets user monitor each cut individually
• Multi-Cut Preview
• Plays through a succession of cuts from a designated starting point
• Memory Rehearsal
• Memory buffer is switchable between 5 and 10 seconds; allows user to edit a cut and edit between two cuts instantly
• Review
• Plays back edits done on the recorder after performing Auto-Edit
• Insert Audio
• Allows insertion of audio to an already recorded program; exchanges a recorded cut in assemble mode for another cut
• Naming
• User can enter a 12 character name for each individual cut/each playlist
• EDL Downloading
• EDLs can now be downloaded to either a second PCM-E7700 or a PC
• FF and REW time: Less than 60s (with Sony DT-120/PDP-120)
• Quantization: 16-bit linear
• Frequency response: 20Hz
• Total harmonic distortion: Less than 0.05% (at reference level/analog input)
• Wow and flutter: Below measurable limit
• Power requirements: AC 100
• Power consumption: 45W
• Error correction: Double-encoded
• Editing accuracy: 1ms
• Signal-to-noise ratio: More than 90dB (analog input)
• Crosstalk between channels: More than 80dB (at 8kHz/analog input)
• Recording system: Rotary-head DAT recording
• Standard: 2000 rpm
• Twice normal speed: 4000 rpm
• Track pitch: 13.6µm
• Head system: Rotary-head system (player; 2 heads, recorder; 4 heads)
• Number of channels: 2 (stereo)
• Sampling frequencies: 48kHz, 44.1kHz
• Modulation: 8 to 10 modulation
• De-emphasis: 50µs/15µs (playback)
• Phase difference between channels: Within 10 (20kHz)
• Level difference between channels: Within 0.2dB (1kHz)
• Search speed: Max x 150 normal speed
• Jog speed: x 1/128
• Cueing speed: x 1/5
• Locate accuracy: 0/-1 frame
• Crossfade time: 0
• Reference level: +4dBu
• Maximum level: +24dBu
• Impedance: 10kohms 600ohms
• Connector: Phono type
• Format: AES/EBU (w/transformer)
• Level: -10dBu at reference level
• Max: -26dBu at reference level (at 80000ohms load)
• Phone: stereo
• Impedance: 220ohms
• Standard: 2000 rpm
• Standard: 8.15mms
• Connector: Phono type
• Connector: XLR-3-31 type
• Impedance: 10kohms 600ohms
• Twice normal speed: 4000 rpm
• Twice normal speed: 16.30mms
Features:
• Compact innovative design
• Excellent portability and simple operation. The design of the PCM-E7700 is like that of a laptop computer with an EL display
• Both a player and a recorder, the compact, handy unit weights approximately 8kg (17lb. 10oz.)
• The PCM-E7700 employs EDL based auto-assembly editing, which significantly reduces editing time.
• Edit-in and -out pints are displayed on the EL (Electro-Luminescent) screen. Up to 100 bars can be displayed on the screen as the EDL
• Auto Edit key initiates the complete editing sequence
• EDL and set-up data can be memorized in a back-up memory. Real time monitoring during auto editing and dubbing is provided, and detected errors can be automatically listed and reviewed in the ERROR REVIEW mode function
• Level and balance are adjustable, level and balance settings are also stored along with the EDL and can be recalled during auto editing
• All processing is digital and editing is non-destructive
• Source tapes can be saved and archives unaffected
• High -speed editing and dubbing is achieved by a newly developed servo IC and an advanced DAT signal processing IC, at both normal and twice normal speeds
• Real-time jog capability with high sound quality
• RAW (Read-After-Write) function for real time monitoring
• Internal SMPTE/EBU/Film timecode formats and absolute timecode (A-Time) can be used during recording and dubbing by the PCM-E7700 for editing
• Timecode, ID and program number recording and locating capability
• Headphone jack and unbalanced analog monitor outputs are provided
• Equipped with both AES/EBU digital and balanced analog inputs.
• PCM-E7700 Version 2.0 Software Features
• 3 Modes of Preview:
• Single Cut Preview
• Lets user monitor each cut individually
• Multi-Cut Preview
• Plays through a succession of cuts from a designated starting point
• Memory Rehearsal
• Memory buffer is switchable between 5 and 10 seconds; allows user to edit a cut and edit between two cuts instantly
• Review
• Plays back edits done on the recorder after performing Auto-Edit
• Insert Audio
• Allows insertion of audio to an already recorded program; exchanges a recorded cut in assemble mode for another cut
• Naming
• User can enter a 12 character name for each individual cut/each playlist
• EDL Downloading
• EDLs can now be downloaded to either a second PCM-E7700 or a PC
• FF and REW time: Less than 60s (with Sony DT-120/PDP-120)
• Quantization: 16-bit linear
• Frequency response: 20Hz
• Total harmonic distortion: Less than 0.05% (at reference level/analog input)
• Wow and flutter: Below measurable limit
• Power requirements: AC 100
• Power consumption: 45W
• Error correction: Double-encoded
• Editing accuracy: 1ms
• Signal-to-noise ratio: More than 90dB (analog input)
• Crosstalk between channels: More than 80dB (at 8kHz/analog input)
• Recording system: Rotary-head DAT recording
• Standard: 2000 rpm
• Twice normal speed: 4000 rpm
• Track pitch: 13.6µm
• Head system: Rotary-head system (player; 2 heads, recorder; 4 heads)
• Number of channels: 2 (stereo)
• Sampling frequencies: 48kHz, 44.1kHz
• Modulation: 8 to 10 modulation
• De-emphasis: 50µs/15µs (playback)
• Phase difference between channels: Within 10 (20kHz)
• Level difference between channels: Within 0.2dB (1kHz)
• Search speed: Max x 150 normal speed
• Jog speed: x 1/128
• Cueing speed: x 1/5
• Locate accuracy: 0/-1 frame
• Crossfade time: 0
• Reference level: +4dBu
• Maximum level: +24dBu
• Impedance: 10kohms 600ohms
• Connector: Phono type
• Format: AES/EBU (w/transformer)
• Level: -10dBu at reference level
• Max: -26dBu at reference level (at 80000ohms load)
• Phone: stereo
• Impedance: 220ohms
• Standard: 2000 rpm
• Standard: 8.15mms
• Connector: Phono type
• Connector: XLR-3-31 type
• Impedance: 10kohms 600ohms
• Twice normal speed: 4000 rpm
• Twice normal speed: 16.30mms